Looking to partner with Burns Ag Supply? Please Contact Us
Free Shipping on Orders above $749.99!
Looking to partner with Burns Ag Supply? Please Contact Us
Free Shipping on Orders above $749.99!
Shaft
Burns ID
503-3500
$150.08
Details
- Round on one end so round tubing can be welded to it; other end is welded to tube weld yoke
- Opposite end of slip sleeve can receive square, rectangular or splined shafts and has grease groove
- Recommended shaft insert length (driveline fully extended) should be length of slip sleeve
- 501-3500 will also use 2-1/8 (.083) tubing 602/604-3500
- 502-3500: 35 series uses 2-1/8 (.120) 602/604-4400 and 44 & 55 series use 2-1/2 (.120) 602/604-4400 tubing
- 500-23-2034 uses shield bearing 501-52-2442
- 510-0615 fits tube numbers 604-0600 & 602-0600
- Note: Rated horsepower is horsepower needed to drive attachment, not tractor horsepower.
- Note: Shafts and tubes may come in 3 and 6 ft. lengths (400-1214 = 6ft.; 404-1214 = 3ft.)
- Series: 35,44,55
- Description: Slip Sleeve 1-3/4 x 20spl (2-1/2OD .12 wall Tube)
- Dim." C" Lg (in): 8
- Dim. "A" Shaft Bore (in): 1-3/4-20 spl
- Shaft Part No.: 404-2720
- Length (ft): 3
- Fits Tube Size OD in. (Wall): 2-1/2 (.120)
- Tube Part No.: 602/604-4400
| Rated Horsepower | ||
| 540 RPM | 1000 RPM | |
| 6 Series | 13 hp | 10 hp |
| 12 Series | 25 hp | 40 hp |
| 14 Series | 35 hp | 50 hp |
| 35 Series | 60 hp | 80 hp |
| 44 Series | 90 hp | 120 hp |
| 55 Series | 125 hp | 160 hp |
| 0675 Series | 15 hp | 24 hp |
| 1800 Series | 30 hp | 48 hp |
| 2600 Series | 100 hp | 144 hp |
Sign In
Registered Customers
